The console of power and medical gases supply KПM-AMC-ПП1
(Rotary One-Humeral Ceiling Console)
The Humeral of console moving in horizontal axis and rotary head allow to place bearing block in optimal working position. While using the console in premises with extensive laminar fields, it allows to place the sockets and gas charging valves in close quarters with operational table. It is used in premises where false ceiling height from 2,5 to 4,5 m.
In premises without false ceiling the console mount system consists in special casing allowing make the disinfection of equipment.
• Gases: oxygen, compressed air, nitrous oxide, carbonic gas, vacuum. • Not less than 10000 cycles of joining-undocking of each gas valve, impossibility of erroneous connection, reliability of joining, possibility of servicing without switching-off of a line of giving of gas. • Operating pressure for all gas outlets, except from vacuum, 0,2-0,5 МPа (2 - 5 atm.). • Outlets throughput capacity, except from vacuum outlet 150 l/min • Working gas escape – not more than 1 ml/min • Vacuum quality for vacuum outlet - from 0 to -0,07 МPа (from 0 to -0,7 atm). • Vacuum outlet throughput capacity, 60 l/min
Standard kitting:
Humeral length between axis
|
1000 mm |
Quick disconnect valves from stainless steel of DIN standard
|
6 ea |
| Independent lines of power supply |
2 ea |
| Electrical sockets (an European standard, 220V, 16 A, 50 Hz, with grounding contact) |
12 ea |
| Network Ethernet socket RJ 45 |
1 ea |
| Phone socket RJ 11> |
1 ea |
Valves of equalising of potentials of DIN standard
|
12 ea |
| Working earth terminals |
2 ea |
| Power indicators |
2 ea |
| Weight |
180 kg |
| Additional weighting to the head |
50 kg |
Additional options:
Hinged shelf from stainless steel (bearing strength 25 kg for a shelf)
|
2 ea |
| Rail for attached implement (bearing strength 50 kg) |
1 ea |
| Equipment for oxygen therapy and aspiration |
1 set |
| Manometers |
|
| Vertical and horizontal head moving |
|
Example of order:
- The rotary one-humeral ceiling console KПM-AMС-ПП1
(Gases, sockets, additional options, attached implement – at the customer’s request)
|