|
Walling consoles are intended for placing on a wall over the patient bed in wards of resuscitation and intensive therapy, can be equipped with a fixing rail, shelves, supports for droppers. On fixing rails arms of fastening of the hinged equipment for oxygen therapy and aspiration take places, that raises convenience of work of the medical personnel. The hinged equipment is a part of consoles, the nomenclature is defined by the customer.
• Gases: oxygen, compressed air, nitrous oxide, carbonic gas, vacuum.
• Not less than 10000 cycles of joining-undocking of each gas valve, impossibility of erroneous connection, reliability of joining, possibility of servicing without switching-off of a line of giving of gas.
• Operating pressure for all gas outlets, except from vacuum, 0,2-0,5 МPа (2 - 5 atm).
• Outlets throughput capacity, except from vacuum outlet 150 l/min
• Working gas escape – not more than 1 ml/min
• Vacuum quality for vacuum outlet - from 0 to -0,07 МPа (from 0to -0,7 atm).
• Vacuum outlet throughput capacity, 60 l/min
Wall resuscitation consoles are made in two variants:
Such execution forms an aesthetic outlook and provides the mechanical damages and disinfectants stability.
This product line of wall consoles combines high functionality and low price
Wall resuscitation console KPM-AMS-NR
From the anodized aluminum profile
|
Standard kitting
|
|
Case from aluminum profile
|
|
Quick disconnect valves from stainless steel of DIN standard
|
|
| Two and more independent lines of power supply |
|
Electrical sockets 230V 50Hz 16A with grounding contact
|
|
Valves of equalising of potentials of DIN standard
|
|
| 2 working earth terminals |
|
| Automatic safety locks on mains supply |
|
Power indicator for every line
|
|
|
|
|
| Additional options: |
|
Rail for the hinged equipment on all console’s length in section of 10*30 mm, bearing strength 50 kg for running meter of a rail
|
|
| Hinged shelf from stainless steel (bearing strength 25 kg for a shelf, no more than 3 shelves for a running meter) |
|
Equipment for the oxygen therapy and aspiration (1 set)
|
|
Chair for droppers, bearing strength 3 kg
|
|
| Manometres |
|
Wall resuscitation single-row console
- КПМ-АМС-НР 1200
the valves no more than 2, sockets and valves of equalizing of potentials - no more than 6
- КПМ-АМС-НР 800
the valves no more than 2, sockets and valves of equalizing of potentials - no more than 4
Wall resuscitation double-row console
- КПМ-АМС-НР 1200
the valves no more than 10, sockets and valves of equalizing of potentials - no more than 20
- КПМ-АМС-НР 800
the valves no more than 6, sockets and valves of equalizing of potentials - no more than 12
- КПМ-АМС-НР 1200
the valves no more than 4, sockets and valves of equalizing of potentials - no more than 6
- КПМ-АМС-НР 800
the valves no more than 4, sockets and valves of equalizing of potentials - no more than 4
Ordering variant:
(Gases, sockets, additional options, attached implement – at the customer’s request)
|
Wall resuscitation console KПM-AMС-НРОС
From zincked steel with white powdering
| Standard kitting |
Case from aluminum profile
|
Quick disconnect valves from stainless steel of DIN standard
|
| Two and more independent lines of power supply |
| Electrical sockets 230V 50Hz 16A with grounding contact |
| 4 valves of equalising of potentials of DIN standard |
2 working earth terminals
|
Automatic safety locks on mains supply
|
| Power indicator for every line |
|
|
|
Additional options:
|
Rail for the hinged equipment on all console’s length in section of 10*30 mm, bearing strength 50 kg for running meter of the rail
|
| Hinged shelf from stainless steel (bearing strength 25 kg for a shelf, no more than 3 shelves for a running meter) |
| Equipment for the oxygen therapy and aspiration (1 set) |
| Chair for droppers, bearing strength 3 kg |
Manometres
|
Wall resuscitation double-row console
- КПМ-АМС-НРОС 2000
the valves no more than 10, sockets - no more than 20
- КПМ-АМС-НРОС 1600
the valves no more than 6, sockets - no more than 12
- КПМ-АМС-НРОС 1200
the valves no more than 5, sockets - no more than 8
- КПМ-АМС-НРОС 800
the valves no more than 4, sockets - no more than 8
Ordering variant:
(Gases, sockets, additional options, attached implement – at the customer’s request)
|
|
