The console of power and medical gases supply
КПМ-АМС-НП
(Wall ward console)
Wall ward consoles are made for placing on a wall over the patient bed in different wards of medical institution. They provide oxygen, air, power supplying, allow medical staff calling and using local illumination (setting of luminescent illumination). Makes the patient placing more comfortable, saving comfortable working conditions for the medical personnel. It’s produced in two varieties, which are the mirror display each other.
• Gases: oxygen, compressed air.
• Not less than 10000 cycles of joining-undocking of each gas valve, impossibility of erroneous connection, reliability of joining, possibility of servicing without switching-off of a line of giving of gas.
• Operating pressure for all gas outlets, except from vacuum, 0,2-0,5 МPа (2 - 5 atm).
• Outlets throughput capacity, except from vacuum outlet 150 l/min
• Working gas escape – not more than 1 ml/min
Standard kitting:
Length:
|
900mm |
| Quick disconnected stainless steel valves of DIN standard |
2 ea |
| Independent lines of power supply |
2 ea |
| Electrical sockets 230V 50Hz 16А with grounding contact |
2 ea |
| Valves of equalizing of potentials of DIN standard |
2 ea |
| Working earth terminals |
2 ea |
| Button of medical staff call (with dump) |
1 ea |
| Daylight fixture |
1 ea |
| Weight |
4,5 kg |
Additional equipment:
- Oxygen therapy equipment 1 set
Ordering variant:
- Wall ward console КПМ-АМС-НП
(Gases, sockets, additional options – at the customer’s request)
|
