Imprevious luminescent lamp
Allocation and application
Raster-type luminescent lamps of general direct lighting are used as lightage source in cleanrooms.
Raster-type lamp is built-in the suspended ceiling construction of T-shaped and non T-shaped types or it can be fitted to the ceiling voids of initial premise through stay braces.
Construction
The protection level of lamp external surface is IP 54, at technological bulk - IP 20 (it can be used for access to the ceiling void) or IP 54. Outside the lamp it's allowed to use wash liquids and disinfectants. The lamp constrruction allowes to make moist mopping and maintenance of equipment behind suspended ceiling. Lens placed at the same side with suspended ceiling, shut out the dust accumulation and clean area flow swirling.
The lamp construction include electronical start-control device (ЭПРА). ЭПРА using allows to increase the efficiency of luminescent lamps, removes its twincle and noice.
|
 |
Features: the high level of safety
Specifications:
| Supply voltage of AC current at frequency 50 Hz, V |
220-240 |
nominal power, W
|
4х18 |
Efficiency, %
|
96 |
Vivacity restricted area, degree
|
60-90 |
Weight, kg
|
8 |
| protection level for optical part inside "cleanroom" according to GOST 14254-96 |
IP54 |
|
|
Ordering variant:
Hygenic lumeniscent lamp with setting constructions (for T-shaped and non T-shaped ceilings)
Imprevious revisory technological access panel
Allocation and application
Access panel is made for servicing of engeneering communications placed in less clean area (ceiling void). Access panel is built-in to the suspended ceilinf of T-shaped and non T-shaped types and has the IP 54 protection level.
Ordering variant:
Imprevious revisory technological access panel with setting constructions (for T-shaped and non T-shaped ceilings)
|
 |
Ceiling bactericidal irradiator (UV-irradiation)
llocation and application
It is used for air and cleanroom surfaces desinfection with the help of ultraviolet bactaricidal irradiators.
Construction
Irradiators are set outside the ceiling panels. The irradiator fitting (ballast) is set backside of ceiling panel.
Additional options
Maintenance of UV-irradiators avalible through the revisory technological access panel.
|
 |
Specification:
Supply
voltage, V
|
Input
current, А |
Lamp type
|
UV-irradiation, W
|
Service life,
hours |
Length of radiant wave
, nm |
| 127/220 |
0,37 |
TUV 25 |
7,0 |
8000 |
253,7 |
Ordering variant:
Ceiling bactericidal irradiator with setting constructions (for T-shaped and non T-shaped ceilings)
Air dispensers and ceiling air ingress units
Air dispensers and ceiling air ingress units are designed for supplying, cleaning, desinfection and ingressing of air in premises that according to the standart document are pure or especially pure.
Air dispensers ang air ingress units are used in medical institutions, pharceucal, optic-electronical and other industries. Air dispensers are built-in the T-shaped and non T-shaped ceiling construction. |
|
|
