| |
|
NEWS
|
Equipment
Elements of cleanrooms:
|
Pharmacy
Since 2000 Miass Factory of Medical Equipment has carried out designing and construction of complexes of cleanrooms for different fields of industries. As the base for this direction of activity 15-years-old experience of our factory in creation of cleanrooms for medical units serves...
|
|
|
Setting constructions - frame
|
|
| АМС МЗМО/English Version/Production/Production run equipment/Building envelop/Hygenic imprevious suspended ceiling/Setting constructions - frame
|
The base of the suspended ceiling is the frame, that consists of high-lift profiles. It forms units in size 600x600 mm.
High-lift profile is fixed to the the ceiling overlap with the help of carrier arm. Panels, imprevious luminescent lamp, air dispensers, UV-irradiators, technological access panels are set to the units of carrying frame. There are two types of mount system: T-shaped (open) and non T-shaped (closed). In the closed systems carrying frame is completely closed by panels, and in open systems - it's partly observed. Ceiling panels, imprevious luminescent lamp and ceiling system of air dispensers form the closed equal surface. The ceiling construction allows to make revisions of equipment placed in ceiling void using revisory (technological) access and illuminators.
While connecting the suspended ceiling with wallings, ceiling panels are set to the angle and proofed on premise perimeter.
|
|
Non T-shaped system
Construction
The ceiling panels are latched into high-lift profile of suspention system and proofed outside.
Features: good looking, minimal isolation joints between the panels.
T-shaped system
Construction
T-shaped suspention system is generaly used in premises with "Г" classification and for budgetary variants. High-lift profile at cross-section view looks like "T". Ceiling panels made of galvanized steel are placed to the units of suspention system and proofed both outside and inside.
Features: economis, easily installation and therefore using.
|
|
|
|
